Interfaces
- 1 port of 10/100Base-T (Ethernet)
- 1 interface of 2G/3G/4G with channel redundancy support
- 2 SMA-type (female) connectors for 2G/3G/4G antennas (Omni, sectoral, panel, etc.)
- 1 SMA-type (female) connectors for external GPS antenna
- Wi-Fi 2.4 GHz IEEE 802.11b/g/n
2G/3G/4G features
- Support for channel redundancy (2 nano-SIM cards)
- Network mode selection
WLAN features
- Support for IEEE 802.11b/g/n
- Data aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx)
- WMM-based priority and planning
- Support for hidden SSID
- 4 virtual access points
- External access points detection
Network functions
- Automatic speed negotiation, duplex mode negotiation and MDI/MDI-X switch-over
- Operation in router mode
- Support for NAT
- Firewall
- Static routing
- DHCP server
- Support for GRE over IPsec1
- Support for ACL
- Support for NTP
QoS functions
- Packet priorities and planning based on profiles
- Bandwidth restriction for each SSID
- Modification of WMM parameters
2G/3G/4G interface parameters
Frequency ranges2
- 4G LTE FDD: B1, B3, B5, B7, B8, B20
- 4G LTE TDD: B40
- 3G UMTS: B1, B8
- 2G GSM: 850M, 900M, 1800M, 1900M
Data rates3
- 4G LTE FDD (Cat 4): 150 Mbps (DL) / 50 Mbps (UL)
- 4G LTE TDD (Cat 4): 130 Mbps (DL) / 35 Mbps (UL)
- 3G DC-HSPA+: 42 Mbps (DL) / 5,76 Mbps (UL)
- 2G EDGE: 384 kbps (DL) / 384 kbps (UL)
Maximum power of the transmitter2
- 4G LTE: up to 23 dBm
- 3G UMTS: up to 23 dBm
- 2G GSM: up to 33 dBm
Wi-Fi interface parameters
- Frequency range: 2400-2480 MHz
- CCK, BPSK, QPSK, 16QAM, 64QAM modulations
- Internal omni-directional antenna
- Support for MIMO 2×2
- Embedded Realtek RTL8197FS chip (IEEE 802.11b/g/n)
- Bandwidth: 20, 40 MHz
Operational channels2
- 802.11b/g/n: 1-13 (2412–2472 MHz)
Data rate3
- 802.11n: 300 Mbps
Receiver sensitivity
- 2.4 GHz: up to -90 dBm
Maximum power of the transmitter2
- 2.4GHz: up to 18 dBm
Security
- Centralized authorization via RADIUS server (WPA/WPA2 Enterprise)1 WPA/WPA2 encryption
- Support for Captive Portal1
Configuring
- Management via Telnet, SSH
- Web interface
- CLI
- NETCONF1
Physical specifications
- Maximum power consumption 8 W
- Realtek RTL8197FS processor
- 32 MB Flash
- 128 MB RAM
- Power supply:
– Passive PoE 24 V
– DC 9-36 V
- Operating temperature: from -45°С to +60°С
- IP54 protection level
- Dimensions (WxHxD): 88×232.5×47 mm
- Pole mounted
1 The functions will be realized in 1.3.0 firmware version. The current firmware version is 1.1.0.
2 The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country.
3 The maximum wireless data rate is defined according to IEEE 802.11n/ac standard. The real bandwidth can be different. Conditions of the network, environment, the amount of traffic, building materials and constructions and network service data can decrease the real band- width. The environment can influence on the network coverage range.
