Interfaces
- 1 x GPON WAN
- 1 x 1G LAN
- 1 х RF
PON interface parameters
- Compliance with ITU-T G.984.2, ITU-T G.984.5 Filter, FSAN Class B+, SFF-8472
- Connector type – SC/APC
- Transmission media – fiber-optic cable SMF – 9/125, G.652
- Maximum operating distance – 20 km
- Transmitter:
- 1310 nm DFB Upstream Burst Mode Transmitter
- Data rate: 1244 Mbps
- Average Launch Power: +0.5..+5 dBm
- Spectral Line Width 1 nm (-20 dB)
- 1310 nm DFB Upstream Burst Mode Transmitter
- Receiver:
- 1490 nm APD/TIA Downstream CW Mode Digital Receiver
- Data rates: 2488 Mbps
- Receiver Sensitivity -28 dBm, BER≤1.0×10-10
- Receiver Optical Overload -4 dBm
- 1490 nm APD/TIA Downstream CW Mode Digital Receiver
CaTV receiver
- CaTV video receiver, wavelength 1550 nm
- Input optical power: -8..+2 dBm
- Carrier-to-Noise Ratio (CNR): 46 dB
- RF bandwidth: from 47 to 870 MHz
- HF output: 17 dBmV per channel, with 4 dB positive antenna tilt
- RF output impedance: 75 Ω
LAN interfaces parameters
- 1 port of Ethernet 10/100/1000 Base-T (RJ-45)
Physical parameters and environment conditions
- Dimensions – 160x120x40 mm, desktop case
- Power supply: external DC adapter 12V/0,5А
- Maximum power consumption: 5W
- Operating temperature from +5 to +40°С
- Operating humidity ≤ 80%
Supported standards
- ITU-T G.984.x – GPON
- ITU-T G.988 OMCI specification
- IEEE 802.1D
- IEEE 802.1Q
- IEEE 802.1P
Specifications
- Support for Quality if Service (QoS) mechanisms
- VLAN in compliance with IEEE 802.1Q
Security functions
- Rate limiting per ports
- FEC coding
Configuring and monitoring
- Remote management via OMCI
- Firmware updating via: OMCI, HTTP
