Ethernet Access Switches MES2428

  • Advanced L2 features
  • Support for Multicast (IGMP Snooping, MVR)
  • Advanced security functions (L2-L4 ACL, IP Source Guard, Dynamic ARP Inspection, etc.)

Ethernet Access Switches MES2428 provide end users connection to networks of large enterprises, small and mid-sized businesses and service providers via Fast and Gigabit Ethernet interfaces. The switches support Virtual Local Area Networks (VLAN), multicast groups and advanced security functions.

Report Abuse
Description

General parameters

  • Packet processor: Realtek RTL8332M
  • 24 ports 10/100/1000BASE-T
  • 4 Combo ports 10/100/1000BASE-T/100BASE-FX/1000BASE-X
  • Console port RS-232/RJ-45
  • Bandwidth 56 Gbps
  • Throughput for 64-byte packets 41.658 MPPS
  • MAC table 8K
  • ACL table 1.5K
  • Jumbo frame size the maximum packet size is 10240 bytes
  • Buffer memory 512 KB
  • RAM (DDR3) 256 MB
  • ROM (SPI Flash) 32 MB
  • L2 Multicast groups (IGMP
  • Snooping) 512
  • Quality of Service (QoS) 8 output queues per port

Interface features

  • Head-of-line blocking (HOL) protection
  • Back pressure support1
  • Auto MDI/MDIX
  • umbo frames
  • Flow Control IEEE 802.3X
  • RSPAN
  • Port mirroring

MAC table

  • Independent learning mode per VLAN
  • MAC Multicast Support
  • Configurable aging time of MAC addresses
  • Static MAC Entries
  • MAC change events monitoring per ports
  • MAC flapping events monitoring per ports1

L2 Multicast features

  • STP (Spanning Tree Protocol, IEEE 802.1d)
  • RSTP (Rapid Spanning Tree Protocol, IEEE 802.1d)
  • MSTP (Multiple Spanning Tree Protocol, IEEE 802.1s)
  • STP Root Guard
  • STP Loop Guard
  • STP BPDU Guard
  • BPDU Filtering
  • Spanning Tree Fast Link option
  • Layer 2 Protocol Tunneling
  • ERPS (G.8032v2)1
  • ELPS (G.8031)1
  • Loopback Detection (LBD)
  • Port isolation
  • Storm Control for different types of traffic (broadcast, multicast, unknown unicast)

Link Aggregation functions

  • Static LAG
  • Dynamic LAG (LACP)
  • LAG Balancing Algorithm

Service functions

  • Virtual cable testing (VCT)
  • Optical transceiver diagnostics
  • Green Ethernet1

IPv6

  • IPv6 Host
  • Dual-stack

Security functions

  • DHCP Snooping
  • DHCP Option 82
  • IP Source Guard
  • Dynamic ARP Inspection (Protection)
  • sFlow1
  • MAC-based authentication, Port Security, static MAC entries
  • Port-based authentication IEEE 802.1x1
  • Guest VLAN1
  • DoS attacks prevention1
  • Traffic segmentation1
  • DHCP clients filtering
  • BPDU attacks prevention
  • PPPoE Intermediate agent

Access control lists (ACL)

    •  L2-L3-L4 ACL (Access Control List)
    • IPv6 ACL
    • ACL based on:
      • – Switch port
      • – IEEE 802.1p priority
      • – VLAN ID
      • – EtherType
      • – DSCP
      • – IP type
      • – TCP/UDP port number
      • – User Defined Bytes

Quality of service (QoS) and rate limiting

      • Shaping, policing
      • Scheduling algorithms: Strict Priority/Weighted Round Robin (WRR)
      • Support for IEEE 802.1p Class of Service
      • CoS to DSCP, DSCP to CoS remarking
      • IEEE 802.1p priority for management VLAN
      • ACL-based traffic classification
      • ACL-based CoS/DSCP mark assignmen
      • ACL-based VLAN assignment

ОАМ

      • IEEE 802.3ah, Ethernet OAM
      • IEEE 802.3ah Unidirectional Link Detection (UDLD)
      • IEEE 802.1ag, Connectivity Fault Management (CFM)1
      • Dying Gasp

Main management functions

      • Download and upload of configuration file via TFTP/SFTP
      • Simple Network Management Protocol (SNMP)
      • Command LIne Interface (CLI)
      • Web interface1
      • Syslog
      • Simple Network Time Protocol (SNTP)
      • Traceroute
      • LLDP (IEEE 802.1ab) + LLDP MED
      • Access management – privilege levels for users
      • Management interface blocking
      • Local authentication
      • IP addresses filtering for SNMP
      • RADIUS and TACACS+ clients
      • SSH server
      • SSL
      • Input commands logging via TACACS+1
      • DHCP autoprovision
      • DHCP Relay (support for IĐ v4)
      • DHCP Option 121
      • DHCP Relay Option 82
      • PPPoE Circuit-ID tag adding
      • Flash File System
      • Debugging commands
      • Limiting of traffic to CPU
      • Password encryption
      • Ping (support for IPv4/IPv6)
      • IPv4/IPv6 static routes support
      • Support for several versions of configuration file

Monitoring functions

      • Interface statistics
      • RMON/SMON1
      • CPU utilization monitoring per task and per traffic type
      • RAM utilization monitoring
      • Temperature monitoring
      • TCAM monitoring

Physical specifications and ambient parameters

      • Power supply 220 VAC, 50 Hz/18–72 VDC
      • Maximum power consumption 18 W
      • Hardware support for Dying Gasp
      • Operating temperature: from -20 to +50 °Х
      • Storage temperature: from -40 to +70 °Х
      • Operating humidity: no more than 80%
      • Cooling: passive
      • Dimensions (WxDxH), mm: 430x178x44
      • Weight 2.35 kg

1

    • Not supported in the current firmware version 10.1.4
Shipping & Delivery

Shipping and Delivery Information goes here

Vendor Info

Vendor Information

  • No ratings found yet!
Product Enquiry

Product Enquiry

Please Login to make enquiry about this product