Wireless user station WB-2P-LR2

Key benefits

  • 802.11b/g/n (2.4G Wi-Fi)
  • MIMO 2×2
  • Power of the transmitter up to 26 dBm
  • Integrated antenna 10,5 dBi
  • РoЕ injector 24V
  • Reset button on the injector

Wireless user station WB-2P-LR2 is a high performance wireless user station designed for up-to-date high speed service provision via Wi-Fi technology.

    Wireless connection
    WB-2P-LR2 is developed for connection to Wi-Fi access network which might be constructed using base stations within long distances.

    Performance 
    To ensure a stable and uninterrupted operation, the device is equipped with high-performance processors providing high routing rates and ensuring the effective operation of FBWA (Fixed Broadband Wireless Access) technology.

    Categories: ,
    Report Abuse
    Description

    Interfaces

    • WLAN: IEEE 802.11b/g/n
    • LAN: 1 Ethernet port RJ-45 10/100/1000BASE-T

    WLAN

    • Support for IEEE  802.11b/g/n standards
    • Data aggregation, including A-MPDU (Tx/Rx) and А-MSDU (Rx)
    • WMM-based priorities and packet planning
    • Access point detection
    • Polling
    • Channel list limitation
    • Support for fixed center frequency
    • Spectrum analyzer
    • Support for wireless bridges (WDS)

      Security

      • Centralized authentication via RADIUS server (WPA/WPA2 Enterprise)
      • WPA/WPA2 encryption
      • 64/128/152-bit WEP encryption

      Network functions

      • VLAN Trunk
      • Management VLAN
      • General VLAN
      • Transparent Mode
      • Wireless Transparent Bridge
      • PPPoE client

      Configuring

      • Firmware update and configuration via DHCP-autoprovisioning, TR-069
      • Remote management via Telnet, SSH
      • Web interface
      • SNMP (Monitoring)

      Wireless interface parameters

      • Frequency range  2402–2482 MH
      • DSSS, CCK, BPSK, QPSK, 16QAM, 64QAM modulation
      • MIMO 2×2
      • Integrated Realtek RTL8197FS Wi-Fi chip
      • Bandwidth: 5, 10, 20, 40 MHz

      Operating channels1

      • 802.11b/g/n: 1–13 (2402–2482 MHz)

      Data rate2

      • 802.11b: up to 11 Mbps
      • 802.11g: up to 54 Mbps
      • 802.11n: up to 300 Mbps

      Receiver sensitivity

      • 2.4 GHz: up to -98 dBm

      Maximum power of the transmitter1

      • 2.4 GHz: 26 dBm

      Antenna parameters

      • Antenna gain: 10,5 dBi
      • Linear polarization: H/V
      • SWR: 2.0 max
      • Beam width (H): 60°
      • Beam width (V): 15°

      Physical specifications

      • Power consumption up to 9 W
      • Realtek RTL8197FS 1 GHz processor
      • RAM 128 MB
      • Flash 32 MB
      • Power supply: PoE 24 V
      • Operating temperature: -45°С to +65°С
      • Operating humidity: up to 95%
      • Dimensions (WхDхH): 80x66x282 mm
      • IP54 protection
      • Pole mounting

        1The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country.

        2The maximum wireless data rate is defined according to IEEE 802.11b/g/n standard. The real bandwidth can be different. Conditions of the network, environment, the amount of traffic, building materials and constructions and network service data can decrease the real bandwidth. The environment can influence on the network coverage range.

        Shipping & Delivery

        Shipping and Delivery Information goes here

        Vendor Info

        Vendor Information

        • No ratings found yet!
        Product Enquiry

        Product Enquiry

        Please Login to make enquiry about this product